Aurora PCI-SB StarFabric Guía de instalación descargar pdf (Pagina 61)

PCI-SB StarFabric PCI Interface Card Installation Guide 4-3

Determining Operating Status

FIGURE 37. Determining Normal Operating Status by Viewing LEDs

If you encounter any of these error conditions, follow the troubleshooting proce-

dures in “Troubleshooting the PCI-SB Card” on page 4-4.

After power-up, Green LEDs for ports in use

should remain on or solid if links are syn-

chronized and passing traffic. If LEDs are

Off, the link is disabled. See Step 6 in Trou-

bleshooting procedures.

If both rows of Green LEDs flash on and

off, there is a problem with the links. See

Step 2 in the Troubleshooting

procedures.

If one row of LEDs flashes on and off,

traffic is disabled on that link. See Step

3 in Troubleshooting procedures.

Use Windows Device Manager or the

Linux command lspci to check on the

PCI-SB card you installed.

If your card does not appear, see

Steps 4 & 5 in Troubleshooting

procedures.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 107 108

Sin comentarios

Aurora PCI-SB StarFabric Guía de instalación Pagina 61